Osprey® M2/MA

Master alloyDatasheet

Powder designed for

  • Metal Injection Moulding (MIM)

Datasheet updated Apr 6, 2023 6:39 AM CET (supersedes all previous editions)

Disclaimer: Data and recommendations are for guidance only, and the suitability of a powder for a specific process or application can be confirmed only when we know the actual conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Osprey® powder.

Osprey® M2/MA is a master alloy, designed for blending with carbonyl iron powder, for Metal Injection Moulding (MIM). The alloy creates standard M2 high-speed steel after sintering.

Osprey® metal powder is manufactured by Inert Gas Atomization (IGA), producing a powder with a spherical morphology which provides good flow characteristics and high packing density. In addition, the powder has a low oxygen content and low impurity levels, resulting in a metallurgically clean product with enhanced mechanical performance.

Chemical composition (nominal), %
Blend ratio
MA Carbonyl Fe Fe C Cr Mo Si Mn W V
1
2
Bal. 3.0 13.0 15.0 0.8 0.8 18.5 6.0

Disclaimer: Data and recommendations are for guidance only, and the suitability of a powder for a specific process or application can be confirmed only when we know the actual conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Osprey® powder.